• mechanical properties investigation of carbon/carbon composites fabricated by a fast densification process

    نویسندگان :
    جزئیات بیشتر مقاله
    • تاریخ ارائه: 1390/01/01
    • تاریخ انتشار در تی پی بین: 1390/01/01
    • تعداد بازدید: 650
    • تعداد پرسش و پاسخ ها: 0
    • شماره تماس دبیرخانه رویداد: -
     carbon/carbon (c/c) composites were prepared by thermal gradient chemical vapor infiltration with a fast densification rate. the fracture morphology and mechanical properties were examined by scanning electron microscopy and mechanical testing, respectively. the effects of preform type and heat treatment temperature (htt) on the mechanical properties of c/c composites were analyzed. the results show that the average flexural strength drops from 47.8 mpa to 38.6 mpa as the htt increases from 2100 °c to 2500 °c. c/c composites with felt as preform show brittle fracture and samples with needle-punched felt as reinforcement present obvious pseudoplastic property. the interlaminar shear strength of needle-punched felt reinforced composites is higher than that of sample with felt as preform by 44.26% owing to the needle-punched fiber in the thickness direction. the strength of interfacial bonding plays a key role to mechanical properties and failure behavior of c/c composites.

سوال خود را در مورد این مقاله مطرح نمایید :

با انتخاب دکمه ثبت پرسش، موافقت خود را با قوانین انتشار محتوا در وبسایت تی پی بین اعلام می کنم
مقالات جدیدترین رویدادها