-
out-of-plane behavior of masonry infill walls
جزئیات بیشتر مقاله- تاریخ ارائه: 1394/02/01
- تاریخ انتشار در تی پی بین: 1394/02/01
- تعداد بازدید: 659
- تعداد پرسش و پاسخ ها: 0
- شماره تماس دبیرخانه رویداد: -
in order to investigate the out-of-plane behaviour of masonry infill walls, quasi-static testing was performed on a masonry infill walls built inside a reinforced concrete frame by means of an airbag system to apply the uniform out-of-plane load to each component of the infill. the main advantage of this testing setup is that the out-of-plane loading can be applied more uniformly in the walls, contrarily to point load configuration. the test was performed under displacement control by selecting the mid-point of the infill as control point. input and output air in the airbag was controlled by using a software to apply a specific displacement in the control point of the infill wall. the effect of the distance between thereaction frame of the airbag and the masonry infill on the effective contact area was previously analysed. four load cells were attached to the reaction frame to measure the out-of-plane force.the effective contact area of the airbag was calculated by dividing the load measured in loadcells by the pressure inside the airbag. when the distance between the reaction walls and the masonry infill wall is smaller, the effective area is closer to the nominal area of the airbag. deformation and crack patterns of the infill confirm the formation of arching mechanism and two-way bending of the masonry infill. until collapse of the horizontal interface between infill and upper beam in rc frame, the infill bends in two directions but the failure of that interface which is known as weakest interface due to difficulties in filling the mortar between bricks of last row and upper beam results in the crack opening trough a well-defined path and the consequent collapse of the infill.
مقالات جدیدترین رویدادها
-
استفاده از تحلیل اهمیت-عملکرد در ارائه الگوی مدیریت خلاقیت سازمانی و ارائه راهکار جهت بهبود
-
بررسی تاثیر ارزش وجوه نقد مازاد بر ساختار سرمایه شرکت های پذیرفته شده در بورس اوراق بهادار تهران
-
بررسی تأثیر سطح افشای ریسک بر قرارداد بدهی شرکت های پذیرفته شده در بورس اوراق بهادار تهران
-
بررسی تأثیر رتبه بندی اعتباری مبتنی بر مدل امتیاز بازار نوظهور بر نقد شوندگی سهام با تأکید بر خصوصی سازی شرکت ها
-
تأثیر آمیخته بازاریابی پوشاک ایرانی بر تصویر ذهنی مشتری پوشاک ایرانی (هاکوپیان)
-
بررسی کارایی معیارهای گسیختگی مختلف برای بتن های توانمند تحت اثر تنش های چندمحوری
-
ارزیابی اثرات سوء مکانیابی نامناسب آرامستان ها بر محیط زیست شهری
-
ارتباط بین مدیریت سود، حاکمیت شرکتی و چسبندگی هزینه در شرکت های پذیرفته شده در بورس اوراق بهادار تهران
-
a hole filling method for surfaces by usingc1 -powell–sabin splines. estimation of the smoothing parameters
-
modeling for the catalytic coupling reaction of carbon monoxide to diethyl oxalate in fixed-bed reactors: reactor model and its applications
مقالات جدیدترین ژورنال ها
-
مدیریت و بررسی افسردگی دانش آموزان دختر مقطع متوسطه دوم در دروان کرونا در شهرستان دزفول
-
مدیریت و بررسی خرد سیاسی در اندیشه ی فردوسی در ادب ایران
-
واکاوی و مدیریت توصیفی قلمدان(جاکلیدی)ضریح در موزه آستان قدس رضوی
-
بررسی تاثیر خلاقیت، دانش و انگیزه کارکنان بر پیشنهادات نوآورانه کارکنان ( مورد مطالعه: هتل های 3 و 4 ستاره استان کرمان)
-
بررسی تاثیر کیفیت سیستم های اطلاعاتی بر تصمیم گیری موفق در شرکتهای تولیدی استان اصفهان (مورد مطالعه: مدیران شرکتهای تولیدی استان اصفهان)
-
کمیته حسابرسی و کیفیت اطلاعات حسابداری: شواهدی از مالکیت خانوادگی
-
بررسی تاثیر تجربه و دانش مالی مدیر عامل و اعضای هیات مدیره بر کیفیت افشا و عملکرد شرکت
-
ولایت و شئونات آن در قرآن و عرفان
-
بررسی تاثیر مسئولیت پذیری اجتماعی بر محدودیت مالی طی چرخه عمر در شرکت های پذیرفته شده در بورس اوراق بهادار تهران
-
analysis of rake angle effect to stress distribution on excavator bucket teeth using finite element method
سوال خود را در مورد این مقاله مطرح نمایید :