• preparation of aluminium ammonium calcium phosphates using microwave radiation

    جزئیات بیشتر مقاله
    • تاریخ ارائه: 1392/07/24
    • تاریخ انتشار در تی پی بین: 1392/07/24
    • تعداد بازدید: 898
    • تعداد پرسش و پاسخ ها: 0
    • شماره تماس دبیرخانه رویداد: -
     microwave radiation was used in the acquisition of aluminium ammonium calcium phosphates. the substrates such as caco3, h3po4, aqueous ammonia were reagent grade, whereas al(oh)3 was prepared afresh. the influence of process parameters (ph 6 ± 2, molar ratios of al3+: ca2+: po 4 3−in the substrates, respectively 0.31: 0.62: 1; 0.5: 0.5: 1; 0.72: 0.36: 1) on the phase composition and the product properties was determined. statistical software statistica 10 was used for planning and evaluation of the experiments. the process parameters making it possible to acquire the material with the anticipated physicochemical properties were determined based on statistical evaluation of the planned research by the plan fractional factorial design at three levels 3(k−p). the phase composition of the samples was studied using xrd analysis. the specific surface area was calculated using the bet method and the particle size was determined by lsm. materials with a molar ratio of al3+: ca2+ and al3+: nh 4 +in the range of 0.07–0.76 and 0.75–3.4, respectively, with an absorption oil number of 36–56 g per 100 g, s bet within 8.2–73 m2 g−1, and particle size in the range of 156–252 nm were obtained.

سوال خود را در مورد این مقاله مطرح نمایید :

با انتخاب دکمه ثبت پرسش، موافقت خود را با قوانین انتشار محتوا در وبسایت تی پی بین اعلام می کنم
مقالات جدیدترین رویدادها
مقالات جدیدترین ژورنال ها