• shear failure analysis on ultra-high performance concrete beams reinforced with high strength steel

    جزئیات بیشتر مقاله
    • تاریخ ارائه: 1392/07/24
    • تاریخ انتشار در تی پی بین: 1392/07/24
    • تعداد بازدید: 672
    • تعداد پرسش و پاسخ ها: 0
    • شماره تماس دبیرخانه رویداد: -
     a new deck system for moveable bridges was developed that makes use of ultra-high performance concrete (uhpc) reinforced with high strength steel (hss) rebar to achieve the light weight and high strength requirements in moveable bridge applications. however, the typical deck strips of this deck system failed predominantly due to shear cracks in simply supported beam proof tests. this paper investigates the mechanism of the deck strip shear failure experimentally and analytically. experimental studies were performed at several scales, including material characterization, bond strength tests, small-scale prism tests, and full-scale beam tests. specimens with traditional shear strengthening techniques were also tested. several existing formulas were utilized to predict the shear strength, and the results were compared to the experimental results. the accuracy and limitations of these formulas are discussed. the shear failure of uhpc–hss beams is not characterized by brittle response or catastrophic load reduction as with normal reinforced concrete. therefore, this particular shear failure mode is regarded as acceptable. however, the additional shear resistance caused by the localized deformation of the longitudinal reinforcement is not recommended to be considered for design capacity formulas.

سوال خود را در مورد این مقاله مطرح نمایید :

با انتخاب دکمه ثبت پرسش، موافقت خود را با قوانین انتشار محتوا در وبسایت تی پی بین اعلام می کنم
مقالات جدیدترین رویدادها
مقالات جدیدترین ژورنال ها